rfsplatter

TX Settings

RP_STE

Repeater squelch tail elimination — suppress squelch tail from repeater.

Options
OFF / 1–10
Default
OFF
Category
TX Settings

Notes

Sends a signal to the repeater to drop its TX squelch tail. Value is burst count.

How to access it

  1. Press MENU on the radio to open the menu.
  2. Scroll with up/down arrows until you see RP_STE.
  3. Press MENU again to enter the setting.
  4. Use up/down to change the value, then MENU to save, or EXIT to cancel.

Related tx settings

  • TxPwr— Transmit power level
  • TxDir— Repeater offset direction
  • TxOffs— Repeater offset amount in MHz
  • TxCode— Transmit CTCSS/DCS tone or code
  • RxCode— Receive CTCSS/DCS code filter — squelch opens only on matching tone

See the full menu reference for all UV-K5 menu items.