rfsplatter

TX Settings

TxCode

Transmit CTCSS/DCS tone or code.

Options
OFF / CTCSS 67.0–254.1 Hz / DCS codes
Default
OFF
Category
TX Settings

Notes

Tone transmitted continuously during PTT. Required by many repeaters.

How to access it

  1. Press MENU on the radio to open the menu.
  2. Scroll with up/down arrows until you see TxCode.
  3. Press MENU again to enter the setting.
  4. Use up/down to change the value, then MENU to save, or EXIT to cancel.

Related tx settings

  • TxPwr— Transmit power level
  • TxDir— Repeater offset direction
  • TxOffs— Repeater offset amount in MHz
  • RxCode— Receive CTCSS/DCS code filter — squelch opens only on matching tone
  • Freq— VFO frequency — enter frequency directly

See the full menu reference for all UV-K5 menu items.