rfsplatter

Channel Settings · Menu 12

Shift DIR

Repeater offset direction — determines whether TX frequency is added to or subtracted from RX.

Menu #
12
Options
Off / + / −
Default
Off
Category
Channel Settings

How to access it

  1. Press MENU on the radio to open the menu.
  2. Scroll with up/down arrows to menu 12: Shift DIR.
  3. Press MENU again to enter the setting.
  4. Use up/down to change the value, then MENU to save, or EXIT to cancel.

Related channel settings

  • CHL Name— Channel name — the label displayed for the current memory channel
  • RX Frequency— Receive frequency for the current VFO or channel
  • TX Frequency— Transmit frequency for the current VFO or channel
  • R-CTCSS— RX CTCSS tone — squelch only opens when this analog sub-audible tone is detected on the incoming signal
  • R-DCS— RX DCS code — squelch only opens when this digital coded sub-audible squelch stream is detected

See the full RT-900 menu reference for all menu items.