OFFSET

How to access it

1. Press MENU on the radio to open the menu.
2. Scroll with up/down arrows to menu 13: OFFSET.
3. Press MENU again to enter the setting.
4. Use up/down to change the value, then MENU to save, or EXIT to cancel.

Related channel settings

• CHL Name— Channel name — the label displayed for the current memory channel
• RX Frequency— Receive frequency for the current VFO or channel
• TX Frequency— Transmit frequency for the current VFO or channel
• R-CTCSS— RX CTCSS tone — squelch only opens when this analog sub-audible tone is detected on the incoming signal
• R-DCS— RX DCS code — squelch only opens when this digital coded sub-audible squelch stream is detected